FLUID MANAGEMENT COMPONENTS

Your cart is currently empty.
Click Here to learn more about Nordson MEDICAL online shopping.

Note:
This total does not include shipping. You can select you shipping method and review the charges at checkout. Also, tax is caculated on your shipping address, and may change during checkout.
Skip Navigation Links
Home
Products
Technical
Solutions
Capabilities
Support
About
Contact Us
Material Information
Nordson MEDICAL endeavors to provide our customers with the most up-to-date technical information, directly from the resin manufacturer, on the resins we use. Find material information here that enables you to select the most appropriate products for your particular application including regulatory data, material data, MSDS, typical resin properties, sterilization stability information, and chemical resistance information. If you have further questions please email us at qara@nordsonmedical.com.
 

Material & Regulatory Information

By clicking a resin's name below you will be able to access:

  • Regulatory Data
  • Material Data
  • MSDS
  • Typical Resin Properties
  • Sterilization Stability Information
  • Chemical Resistance Information

For comprehensive chart views please click Typical Resin Properties, Sterilization Stability, Chemical Resistance. If you have questions regarding colorant information please email qara@nordsonmedical.com.

ABS (-8003, -81, -8012)

-8003 ABS (Natural) — BASF-Terlux 2802 TR

Documentation    
Regulatory Data Material Data MSDS
 
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 4,800
Elongation at Break, % D638 50
Tensile Yield Strength, psi D638 5,700
Flexural Modulus, kpsi D790 330
Rockwell Hardness D D785 R107
Rockwell Hardness M N/A
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 5.5
Deflection Temp °F @264psi D648 173
Deflection Temp °F @66psi D648 N/A
Water Absorption, %, 24 h D570 0.25-0.40
Izod Impact, (Notched) ft-lb/in D256 6.0
Sterilization Stability
Gamma Radiation Withstands up to 5 Mrad doses without yellowing
Ethylene Oxide (EtO) Good
Autoclave Poor; components may distort due to low heat deflection temperatures
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Excellent
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F Satisfactory
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F Satisfactory
Ammonium Hydroxide 10% 23° C 73° F Satisfactory
Ammonium Hydroxide 10% 70° C 158° F Unsatisfactory
Barium Sulfide 100% 24° C 75° F Excellent
Benzene 100% 23° C 73° F Satisfactory
Bleach 100% 23° C 73° F N/A
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F Excellent
Carbon Dioxide 100% 50° C 122° F Satisfactory
Carbon Monoxide 100% 50° C 122° F Satisfactory
Carbon Tetrachloride 100% 50° C 122° F Unsatisfactory
Chlorine Water Dilute 23° C 73° F Unsatisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Satisfactory
Chlorofluorocarbon 11 100% 24° C 75° F N/A
Chloroform 100% 23° C 73° F Unsatisfactory
Cyclohexanone 100% 24° C 75° F Unsatisfactory
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F Satisfactory
Ethyl Acetate 95% 50° C 122° F Satisfactory
Ethylene Glycol 100% 23° C 73° F Excellent
Ethylene Oxide 100% 24° C 75° F Unsatisfactory
Ethylene Oxide 100% 79° C 175° F Unsatisfactory
Fatty Acids N/A
Fluorine 100% 23° C 73° F Unsatisfactory
Formaldehyde 37% 24° C 75° F Unsatisfactory
Gasoline 100% 85° C 185° F Excellent
Glucose Concen. 24° C 75° F Excellent
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F Satisfactory
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Satisfactory
Isopropanol 70% 23° C 73° F N/A
Kerosene 100% 85° C 185° F Satisfactory
Methyl Ethyl Ketone 100% 50° C 122° F Unsatisfactory
Methylene Chloride 100% 23° C 73° F Unsatisfactory
Methanol 100% 23° C 73° F Unsatisfactory
Nitric Acid 10% 23° C 73° F Satisfactory
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F Satisfactory
Phenol 90% 23° C 73° F Unsatisfactory
Phosphoric Acid 5% 98° C 208° F Satisfactory
Propane 100% 23° C 73° F Satisfactory
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F Excellent
Sodium Chloride Sat. sol. 24° C 75° F Excellent
Sodium Hydroxide 10% 70° C 158° F Satisfactory
Steam 120° C 248° F Unsatisfactory
Sulfuric Acid 30% 23° C 73° F Satisfactory
Tetrahydrofuran 100% 23° C 73° F Satisfactory
Toluene 100% 50° C 122° F Satisfactory
Trichloroethylene 100% 23° C 73° F Satisfactory
Water 100% 79° C 175° F Excellent

-81 ABS (Lace White) — INEOS Lustran 348

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 4,800
Elongation at Break, % D638 50
Tensile Yield Strength, psi D638 5,700
Flexural Modulus, kpsi D790 330
Rockwell Hardness D D785 R107
Rockwell Hardness M N/A
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 5.5
Deflection Temp °F @264psi D648 173
Deflection Temp °F @66psi D648 N/A
Water Absorption, %, 24 h D570 0.25-0.40
Izod Impact, (Notched) ft-lb/in D256 6.0
Sterilization Stability
Gamma Radiation Compatible up to 5 Mrads
Ethylene Oxide (EtO) Good
Autoclave Not suitable due to low deflection temperatures
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Excellent
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F Satisfactory
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F Satisfactory
Ammonium Hydroxide 10% 23° C 73° F Satisfactory
Ammonium Hydroxide 10% 70° C 158° F Unsatisfactory
Barium Sulfide 100% 24° C 75° F Excellent
Benzene 100% 23° C 73° F Satisfactory
Bleach 100% 23° C 73° F N/A
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F Excellent
Carbon Dioxide 100% 50° C 122° F Satisfactory
Carbon Monoxide 100% 50° C 122° F Satisfactory
Carbon Tetrachloride 100% 50° C 122° F Unsatisfactory
Chlorine Water Dilute 23° C 73° F Unsatisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Satisfactory
Chlorofluorocarbon 11 100% 24° C 75° F N/A
Chloroform 100% 23° C 73° F Unsatisfactory
Cyclohexanone 100% 24° C 75° F Unsatisfactory
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F Satisfactory
Ethyl Acetate 95% 50° C 122° F Satisfactory
Ethylene Glycol 100% 23° C 73° F Excellent
Ethylene Oxide 100% 24° C 75° F Unsatisfactory
Ethylene Oxide 100% 79° C 175° F Unsatisfactory
Fatty Acids N/A
Fluorine 100% 23° C 73° F Unsatisfactory
Formaldehyde 37% 24° C 75° F Unsatisfactory
Gasoline 100% 85° C 185° F Excellent
Glucose Concen. 24° C 75° F Excellent
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F Satisfactory
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Satisfactory
Isopropanol 70% 23° C 73° F N/A
Kerosene 100% 85° C 185° F Satisfactory
Methyl Ethyl Ketone 100% 50° C 122° F Unsatisfactory
Methylene Chloride 100% 23° C 73° F Unsatisfactory
Methanol 100% 23° C 73° F Unsatisfactory
Nitric Acid 10% 23° C 73° F Satisfactory
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F Satisfactory
Phenol 90% 23° C 73° F Unsatisfactory
Phosphoric Acid 5% 98° C 208° F Satisfactory
Propane 100% 23° C 73° F Satisfactory
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F Excellent
Sodium Chloride Sat. sol. 24° C 75° F Excellent
Sodium Hydroxide 10% 70° C 158° F Satisfactory
Steam 120° C 248° F Unsatisfactory
Sulfuric Acid 30% 23° C 73° F Satisfactory
Tetrahydrofuran 100% 23° C 73° F Satisfactory
Toluene 100% 50° C 122° F Satisfactory
Trichloroethylene 100% 23° C 73° F Satisfactory
Water 100% 79° C 175° F Excellent

-8012 ABS (Sno White) — Ineos-Lustran 348

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 4,800
Elongation at Break, % D638 50
Tensile Yield Strength, psi D638 5,700
Flexural Modulus, kpsi D790 330
Rockwell Hardness D D785 R107
Rockwell Hardness M N/A
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 5.5
Deflection Temp °F @264psi D648 173
Deflection Temp °F @66psi D648 N/A
Water Absorption, %, 24 h D570 0.25-0.40
Izod Impact, (Notched) ft-lb/in D256 6.0
Sterilization Stability
Gamma Radiation Compatible up to 5 Mrads
Ethylene Oxide (EtO) Good
Autoclave Not suitable due to low heat deflection temperatures
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Excellent
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F Satisfactory
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F Satisfactory
Ammonium Hydroxide 10% 23° C 73° F Satisfactory
Ammonium Hydroxide 10% 70° C 158° F Unsatisfactory
Barium Sulfide 100% 24° C 75° F Excellent
Benzene 100% 23° C 73° F Satisfactory
Bleach 100% 23° C 73° F N/A
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F Excellent
Carbon Dioxide 100% 50° C 122° F Satisfactory
Carbon Monoxide 100% 50° C 122° F Satisfactory
Carbon Tetrachloride 100% 50° C 122° F Unsatisfactory
Chlorine Water Dilute 23° C 73° F Unsatisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Satisfactory
Chlorofluorocarbon 11 100% 24° C 75° F N/A
Chloroform 100% 23° C 73° F Unsatisfactory
Cyclohexanone 100% 24° C 75° F Unsatisfactory
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F Satisfactory
Ethyl Acetate 95% 50° C 122° F Satisfactory
Ethylene Glycol 100% 23° C 73° F Excellent
Ethylene Oxide 100% 24° C 75° F Unsatisfactory
Ethylene Oxide 100% 79° C 175° F Unsatisfactory
Fatty Acids N/A
Fluorine 100% 23° C 73° F Unsatisfactory
Formaldehyde 37% 24° C 75° F Unsatisfactory
Gasoline 100% 85° C 185° F Excellent
Glucose Concen. 24° C 75° F Excellent
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F Satisfactory
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Satisfactory
Isopropanol 70% 23° C 73° F N/A
Kerosene 100% 85° C 185° F Satisfactory
Methyl Ethyl Ketone 100% 50° C 122° F Unsatisfactory
Methylene Chloride 100% 23° C 73° F Unsatisfactory
Methanol 100% 23° C 73° F Unsatisfactory
Nitric Acid 10% 23° C 73° F Satisfactory
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F Satisfactory
Phenol 90% 23° C 73° F Unsatisfactory
Phosphoric Acid 5% 98° C 208° F Satisfactory
Propane 100% 23° C 73° F Satisfactory
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F Excellent
Sodium Chloride Sat. sol. 24° C 75° F Excellent
Sodium Hydroxide 10% 70° C 158° F Satisfactory
Steam 120° C 248° F Unsatisfactory
Sulfuric Acid 30% 23° C 73° F Satisfactory
Tetrahydrofuran 100% 23° C 73° F Satisfactory
Toluene 100% 50° C 122° F Satisfactory
Trichloroethylene 100% 23° C 73° F Satisfactory
Water 100% 79° C 175° F Excellent

Acetal (-1006, 1007, -10)

-1006,-1007 Acetal Copolymer — BASF Ultraform N 2320 003

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength N/A
Elongation at Break, % N/A
Tensile Yield Strength, psi N/A
Flexural Modulus, kpsi N/A
Rockwell Hardness D N/A
Rockwell Hardness M N/A
Shore Hardness D N/A
Coef. of Linear 10-5 in/in/°F N/A
Deflection Temp °F @264psi N/A
Deflection Temp °F @66psi N/A
Water Absorption, %, 24 h N/A
Izod Impact, (Notched) ft-lb/in N/A
Sterilization Stability
Gamma Radiation Compatible up to 5 Mrads
Ethylene Oxide (EtO) Excellent
Autoclave Very Good
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Unsatisfactory
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F N/A
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F N/A
Ammonium Hydroxide 10% 23° C 73° F N/A
Ammonium Hydroxide 10% 70° C 158° F N/A
Barium Sulfide 100% 24° C 75° F Excellent
Benzene 100% 23° C 73° F Excellent
Bleach 100% 23° C 73° F Unsatisfactory
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F Excellent
Carbon Monoxide 100% 50° C 122° F N/A
Carbon Tetrachloride 100% 50° C 122° F N/A
Chlorine Water Dilute 23° C 73° F N/A
Chlorine Water Concen. 23° C 73° F N/A
Chlorobenzene 100% 23° C 73° F N/A
Chlorofluorocarbon 11 100% 24° C 75° F N/A
Chloroform 100% 23° C 73° F Satisfactory
Cyclohexanone 100% 24° C 75° F N/A
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F N/A
Ethyl Acetate 95% 50° C 122° F N/A
Ethylene Glycol 100% 23° C 73° F Satisfactory
Ethylene Oxide 100% 24° C 75° F N/A
Ethylene Oxide 100% 79° C 175° F N/A
Fatty Acids Excellent
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F Excellent
Gasoline 100% 85° C 185° F Satisfactory
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F N/A
Hydrochloric Acid 2% 23° C 73° F Satisfactory
Hydrochloric Acid 10% 25° C 77° F Satisfactory
Hydrofluoric Acid 10% 23° C 73° F N/A
Hydrogen Peroxide 1% 24° C 75° F Unsatisfactory
Hydrogen Peroxide 5% 43° C 110° F Unsatisfactory
Isopropanol 70% 23° C 73° F Excellent
Kerosene 100% 85° C 185° F N/A
Methyl Ethyl Ketone 100% 50° C 122° F N/A
Methylene Chloride 100% 23° C 73° F N/A
Methanol 100% 23° C 73° F N/A
Nitric Acid 10% 23° C 73° F N/A
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F N/A
Phenol 90% 23° C 73° F Unsatisfactory
Phosphoric Acid 5% 98° C 208° F Unsatisfactory
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F N/A
Sodium Chloride Sat. sol. 24° C 75° F N/A
Sodium Hydroxide 10% 70° C 158° F N/A
Steam 120° C 248° F N/A
Sulfuric Acid 30% 23° C 73° F Unsatisfactory
Tetrahydrofuran 100% 23° C 73° F N/A
Toluene 100% 50° C 122° F Unsatisfactory
Trichloroethylene 100% 23° C 73° F N/A
Water 100% 79° C 175° F N/A

-10 Acetal — Dupont Delrin 500P

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 N/A
Elongation at Break, % D638 40
Tensile Yield Strength, psi D638 9,900
Flexural Modulus, kpsi D790 450
Rockwell Hardness D D785 R122
Rockwell Hardness M M89
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 N/A
Deflection Temp °F @264psi D648 216
Deflection Temp °F @66psi D648 332
Water Absorption, %, 24 h D570 0.40
Izod Impact, (Notched) ft-lb/in D256 N/A
Sterilization Stability
Gamma Radiation Compatible up to 1 Mrad
Ethylene Oxide (EtO) Excellent
Autoclave Very Good
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Unsatisfactory
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F N/A
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F N/A
Ammonium Hydroxide 10% 23° C 73° F N/A
Ammonium Hydroxide 10% 70° C 158° F N/A
Barium Sulfide 100% 24° C 75° F Excellent
Benzene 100% 23° C 73° F Excellent
Bleach 100% 23° C 73° F Unsatisfactory
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F Excellent
Carbon Monoxide 100% 50° C 122° F N/A
Carbon Tetrachloride 100% 50° C 122° F N/A
Chlorine Water Dilute 23° C 73° F N/A
Chlorine Water Concen. 23° C 73° F N/A
Chlorobenzene 100% 23° C 73° F N/A
Chlorofluorocarbon 11 100% 24° C 75° F N/A
Chloroform 100% 23° C 73° F Satisfactory
Cyclohexanone 100% 24° C 75° F N/A
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F N/A
Ethyl Acetate 95% 50° C 122° F N/A
Ethylene Glycol 100% 23° C 73° F Satisfactory
Ethylene Oxide 100% 24° C 75° F N/A
Ethylene Oxide 100% 79° C 175° F N/A
Fatty Acids Excellent
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F Excellent
Gasoline 100% 85° C 185° F Satisfactory
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F N/A
Hydrochloric Acid 2% 23° C 73° F Satisfactory
Hydrochloric Acid 10% 25° C 77° F Satisfactory
Hydrofluoric Acid 10% 23° C 73° F N/A
Hydrogen Peroxide 1% 24° C 75° F Unsatisfactory
Hydrogen Peroxide 5% 43° C 110° F Unsatisfactory
Isopropanol 70% 23° C 73° F Excellent
Kerosene 100% 85° C 185° F N/A
Methyl Ethyl Ketone 100% 50° C 122° F N/A
Methylene Chloride 100% 23° C 73° F N/A
Methanol 100% 23° C 73° F N/A
Nitric Acid 10% 23° C 73° F N/A
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F N/A
Phenol 90% 23° C 73° F Unsatisfactory
Phosphoric Acid 5% 98° C 208° F Unsatisfactory
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F N/A
Sodium Chloride Sat. sol. 24° C 75° F N/A
Sodium Hydroxide 10% 70° C 158° F N/A
Steam 120° C 248° F N/A
Sulfuric Acid 30% 23° C 73° F Unsatisfactory
Tetrahydrofuran 100% 23° C 73° F N/A
Toluene 100% 50° C 122° F Unsatisfactory
Trichloroethylene 100% 23° C 73° F N/A
Water 100% 79° C 175° F N/A

Acrylic (-50, -57)

-50, -57 Acrylic — Cryolite-Med2

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength N/A
Elongation at Break, % N/A
Tensile Yield Strength, psi N/A
Flexural Modulus, kpsi N/A
Rockwell Hardness D N/A
Rockwell Hardness M N/A
Shore Hardness D N/A
Coef. of Linear 10-5 in/in/°F N/A
Deflection Temp °F @264psi N/A
Deflection Temp °F @66psi N/A
Water Absorption, %, 24 h N/A
Izod Impact, (Notched) ft-lb/in N/A
Sterilization Stability
Gamma Radiation Very good up to commonly used doses (6 Mrads)
Ethylene Oxide (EtO) Excellent
Autoclave Not Recommended
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F N/A
Acetone 100% 50° C 122° F N/A
Acetophenone 100% 24° C 75° F N/A
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F N/A
Ammonia, Liquid 100% 24° C 75° F N/A
Ammonium Hydroxide 10% 23° C 73° F N/A
Ammonium Hydroxide 10% 70° C 158° F N/A
Barium Sulfide 100% 24° C 75° F N/A
Benzene 100% 23° C 73° F N/A
Bleach 100% 23° C 73° F N/A
Boric Acid 7% 35° C 95° F N/A
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F N/A
Carbon Monoxide 100% 50° C 122° F N/A
Carbon Tetrachloride 100% 50° C 122° F N/A
Chlorine Water Dilute 23° C 73° F N/A
Chlorine Water Concen. 23° C 73° F N/A
Chlorobenzene 100% 23° C 73° F N/A
Chlorofluorocarbon 11 100% 24° C 75° F N/A
Chloroform 100% 23° C 73° F N/A
Cyclohexanone 100% 24° C 75° F N/A
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F N/A
Ethyl Acetate 95% 50° C 122° F N/A
Ethylene Glycol 100% 23° C 73° F N/A
Ethylene Oxide 100% 24° C 75° F N/A
Ethylene Oxide 100% 79° C 175° F N/A
Fatty Acids N/A
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F N/A
Gasoline 100% 85° C 185° F N/A
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F N/A
Hydrochloric Acid 2% 23° C 73° F N/A
Hydrochloric Acid 10% 25° C 77° F N/A
Hydrofluoric Acid 10% 23° C 73° F N/A
Hydrogen Peroxide 1% 24° C 75° F N/A
Hydrogen Peroxide 5% 43° C 110° F N/A
Isopropanol 70% 23° C 73° F N/A
Kerosene 100% 85° C 185° F N/A
Methyl Ethyl Ketone 100% 50° C 122° F N/A
Methylene Chloride 100% 23° C 73° F N/A
Methanol 100% 23° C 73° F N/A
Nitric Acid 10% 23° C 73° F N/A
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F N/A
Phenol 90% 23° C 73° F N/A
Phosphoric Acid 5% 98° C 208° F N/A
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F N/A
Sodium Chloride 10% 23° C 73° F N/A
Sodium Chloride Sat. sol. 24° C 75° F N/A
Sodium Hydroxide 10% 70° C 158° F N/A
Steam 120° C 248° F N/A
Sulfuric Acid 30% 23° C 73° F N/A
Tetrahydrofuran 100% 23° C 73° F N/A
Toluene 100% 50° C 122° F N/A
Trichloroethylene 100% 23° C 73° F N/A
Water 100% 79° C 175° F N/A

Copolyester (-CM018)

-CM018 Copolyester — Eastar-MN211, Natural

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength N/A
Elongation at Break, % N/A
Tensile Yield Strength, psi N/A
Flexural Modulus, kpsi N/A
Rockwell Hardness D N/A
Rockwell Hardness M N/A
Shore Hardness D N/A
Coef. of Linear 10-5 in/in/°F N/A
Deflection Temp °F @264psi N/A
Deflection Temp °F @66psi N/A
Water Absorption, %, 24 h N/A
Izod Impact, (Notched) ft-lb/in N/A
Sterilization Stability
Gamma Radiation Very good up to commonly used doses (6 Mrads)
Ethylene Oxide (EtO) Excellent
Autoclave Not Recommended
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F N/A
Acetone 100% 50° C 122° F N/A
Acetophenone 100% 24° C 75° F N/A
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F N/A
Ammonia, Liquid 100% 24° C 75° F N/A
Ammonium Hydroxide 10% 23° C 73° F N/A
Ammonium Hydroxide 10% 70° C 158° F N/A
Barium Sulfide 100% 24° C 75° F N/A
Benzene 100% 23° C 73° F N/A
Bleach 100% 23° C 73° F N/A
Boric Acid 7% 35° C 95° F N/A
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F N/A
Carbon Monoxide 100% 50° C 122° F N/A
Carbon Tetrachloride 100% 50° C 122° F N/A
Chlorine Water Dilute 23° C 73° F N/A
Chlorine Water Concen. 23° C 73° F N/A
Chlorobenzene 100% 23° C 73° F N/A
Chlorofluorocarbon 11 100% 24° C 75° F N/A
Chloroform 100% 23° C 73° F N/A
Cyclohexanone 100% 24° C 75° F N/A
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F N/A
Ethyl Acetate 95% 50° C 122° F N/A
Ethylene Glycol 100% 23° C 73° F N/A
Ethylene Oxide 100% 24° C 75° F N/A
Ethylene Oxide 100% 79° C 175° F N/A
Fatty Acids N/A
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F N/A
Gasoline 100% 85° C 185° F N/A
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F N/A
Hydrochloric Acid 2% 23° C 73° F N/A
Hydrochloric Acid 10% 25° C 77° F N/A
Hydrofluoric Acid 10% 23° C 73° F N/A
Hydrogen Peroxide 1% 24° C 75° F N/A
Hydrogen Peroxide 5% 43° C 110° F N/A
Isopropanol 70% 23° C 73° F N/A
Kerosene 100% 85° C 185° F N/A
Methyl Ethyl Ketone 100% 50° C 122° F N/A
Methylene Chloride 100% 23° C 73° F N/A
Methanol 100% 23° C 73° F N/A
Nitric Acid 10% 23° C 73° F N/A
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F N/A
Phenol 90% 23° C 73° F N/A
Phosphoric Acid 5% 98° C 208° F N/A
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F N/A
Sodium Chloride 10% 23° C 73° F N/A
Sodium Chloride Sat. sol. 24° C 75° F N/A
Sodium Hydroxide 10% 70° C 158° F N/A
Steam 120° C 248° F N/A
Sulfuric Acid 30% 23° C 73° F N/A
Tetrahydrofuran 100% 23° C 73° F N/A
Toluene 100% 50° C 122° F N/A
Trichloroethylene 100% 23° C 73° F N/A
Water 100% 79° C 175° F N/A

Nylon (-0, -1, -2, -3, -4, -5, -06, -07, -7, -72, -U71 & -U75)

-7, -72 Nylon (Glass Reinforced) — Dupont-Zytel 70G33L

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 12,000
Elongation at Break, % D638 300
Tensile Yield Strength, psi D638 12,000
Flexural Modulus, kpsi D790 410
Rockwell Hardness D D785 R121
Rockwell Hardness M M79
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 4
Deflection Temp °F @264psi D648 194
Deflection Temp °F @66psi D648 455
Water Absorption, %, 24 h D570 1.2
Izod Impact, (Notched) ft-lb/in D256 1.0
Sterilization Stability
Gamma Radiation Very good; may discolor to brownish hue
Ethylene Oxide (EtO) Very good; some suceptibility to oxidizing agents
Autoclave Excellent
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Satisfactory
Acetone 100% 50° C 122° F Satisfactory
Acetophenone 100% 24° C 75° F Excellent
Acetylene 100% 24° C 75° F Excellent
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F Satisfactory
Ammonium Hydroxide 10% 23° C 73° F Excellent
Ammonium Hydroxide 10% 70° C 158° F Unsatisfactory
Barium Sulfide 100% 24° C 75° F Satisfactory
Benzene 100% 23° C 73° F Excellent
Bleach 100% 23° C 73° F Satisfactory
Boric Acid 7% 35° C 95° F Unsatisfactory
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F Excellent
Carbon Monoxide 100% 50° C 122° F Excellent
Carbon Tetrachloride 100% 50° C 122° F Excellent
Chlorine Water Dilute 23° C 73° F Satisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Excellent
Chlorofluorocarbon 11 100% 24° C 75° F Excellent
Chloroform 100% 23° C 73° F Satisfactory
Cyclohexanone 100% 24° C 75° F Excellent
Dichlorethylene 100% 23° C 73° F Satisfactory
Ethanol 95% 50° C 122° F Excellent
Ethyl Acetate 95% 50° C 122° F Excellent
Ethylene Glycol 100% 23° C 73° F Excellent
Ethylene Oxide 100% 24° C 75° F Satisfactory
Ethylene Oxide 100% 79° C 175° F Satisfactory
Fatty Acids N/A
Fluorine 100% 23° C 73° F Unsatisfactory
Formaldehyde 37% 24° C 75° F N/A
Gasoline 100% 85° C 185° F Excellent
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F N/A
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Unsatisfactory
Hydrofluoric Acid 10% 23° C 73° F Unsatisfactory
Hydrogen Peroxide 1% 24° C 75° F Satisfactory
Hydrogen Peroxide 5% 43° C 110° F Unsatisfactory
Isopropanol 70% 23° C 73° F Excellent
Kerosene 100% 85° C 185° F Excellent
Methyl Ethyl Ketone 100% 50° C 122° F Excellent
Methylene Chloride 100% 23° C 73° F Satisfactory
Methanol 100% 23° C 73° F Excellent
Nitric Acid 10% 23° C 73° F Unsatisfactory
Oxygen 100% 24° C 75° F Satisfactory
Ozone 100% 43° C 110° F Unsatisfactory
Phenol 90% 23° C 73° F Unsatisfactory
Phosphoric Acid 5% 98° C 208° F Unsatisfactory
Propane 100% 23° C 73° F Excellent
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F Excellent
Sodium Chloride Sat. sol. 24° C 75° F Excellent
Sodium Hydroxide 10% 70° C 158° F Satisfactory
Steam 120° C 248° F Unsatisfactory
Sulfuric Acid 30% 23° C 73° F Unsatisfactory
Tetrahydrofuran 100% 23° C 73° F Excellent
Toluene 100% 50° C 122° F Excellent
Trichloroethylene 100% 23° C 73° F Satisfactory
Water 100% 79° C 175° F Excellent

-0, -1, -2, -3, -4, -5, -06, -07 Nylon (PA 66) — Dupont-Zytel 101F

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 12,000
Elongation at Break, % D638 300
Tensile Yield Strength, psi D638 12,000
Flexural Modulus, kpsi D790 410
Rockwell Hardness D D785 R121
Rockwell Hardness M M79
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 4
Deflection Temp °F @264psi D648 194
Deflection Temp °F @66psi D648 455
Water Absorption, %, 24 h D570 1.2
Izod Impact, (Notched) ft-lb/in D256 1.0
Sterilization Stability
Gamma Radiation Very good; may discolor to brownish hue
Ethylene Oxide (EtO) Very good; some suceptibility to oxidizing agents
Autoclave Excellent
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Satisfactory
Acetone 100% 50° C 122° F Satisfactory
Acetophenone 100% 24° C 75° F Excellent
Acetylene 100% 24° C 75° F Excellent
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F Satisfactory
Ammonium Hydroxide 10% 23° C 73° F Excellent
Ammonium Hydroxide 10% 70° C 158° F Unsatisfactory
Barium Sulfide 100% 24° C 75° F Satisfactory
Benzene 100% 23° C 73° F Excellent
Bleach 100% 23° C 73° F Satisfactory
Boric Acid 7% 35° C 95° F Unsatisfactory
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F Excellent
Carbon Monoxide 100% 50° C 122° F Excellent
Carbon Tetrachloride 100% 50° C 122° F Excellent
Chlorine Water Dilute 23° C 73° F Satisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Excellent
Chlorofluorocarbon 11 100% 24° C 75° F Excellent
Chloroform 100% 23° C 73° F Satisfactory
Cyclohexanone 100% 24° C 75° F Excellent
Dichlorethylene 100% 23° C 73° F Satisfactory
Ethanol 95% 50° C 122° F Excellent
Ethyl Acetate 95% 50° C 122° F Excellent
Ethylene Glycol 100% 23° C 73° F Excellent
Ethylene Oxide 100% 24° C 75° F Satisfactory
Ethylene Oxide 100% 79° C 175° F Satisfactory
Fatty Acids N/A
Fluorine 100% 23° C 73° F Unsatisfactory
Formaldehyde 37% 24° C 75° F N/A
Gasoline 100% 85° C 185° F Excellent
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F N/A
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Unsatisfactory
Hydrofluoric Acid 10% 23° C 73° F Unsatisfactory
Hydrogen Peroxide 1% 24° C 75° F Satisfactory
Hydrogen Peroxide 5% 43° C 110° F Unsatisfactory
Isopropanol 70% 23° C 73° F Excellent
Kerosene 100% 85° C 185° F Excellent
Methyl Ethyl Ketone 100% 50° C 122° F Excellent
Methylene Chloride 100% 23° C 73° F Satisfactory
Methanol 100% 23° C 73° F Excellent
Nitric Acid 10% 23° C 73° F Unsatisfactory
Oxygen 100% 24° C 75° F Satisfactory
Ozone 100% 43° C 110° F Unsatisfactory
Phenol 90% 23° C 73° F Unsatisfactory
Phosphoric Acid 5% 98° C 208° F Unsatisfactory
Propane 100% 23° C 73° F Excellent
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F Excellent
Sodium Chloride Sat. sol. 24° C 75° F Excellent
Sodium Hydroxide 10% 70° C 158° F Satisfactory
Steam 120° C 248° F Unsatisfactory
Sulfuric Acid 30% 23° C 73° F Unsatisfactory
Tetrahydrofuran 100% 23° C 73° F Excellent
Toluene 100% 50° C 122° F Excellent
Trichloroethylene 100% 23° C 73° F Satisfactory
Water 100% 79° C 175° F Excellent

-U71 & -U75 — FGFE5171 Glass Reinforced Nylon Resin

Documentation    
Regulatory Data Material Data MSDS
 

Polycarbonate (-9, -9002, -9010, -9024)

-9 Polycarbonate (Clear) — Bayer-Makrolon 2558

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 10,000
Elongation at Break, % D638 120
Tensile Yield Strength, psi D638 9,200
Flexural Modulus, kpsi D790 330
Rockwell Hardness D D785 R118
Rockwell Hardness M M75
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 3.9
Deflection Temp °F @264psi D648 266
Deflection Temp °F @66psi D648 273
Water Absorption, %, 24 h D570 0.15
Izod Impact, (Notched) ft-lb/in D256 16.0
Sterilization Stability
Gamma Radiation Compatible up to 10 Mrads with minor loss of physical properties; will discolor to yellow-gree hue
Ethylene Oxide (EtO) Highly Compatible
Autoclave Poor; may craze or stress crack due to molding stresses
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Satisfactory
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F N/A
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F N/A
Ammonia, Liquid 100% 24° C 75° F Unsatisfactory
Ammonium Hydroxide 10% 23° C 73° F Unsatisfactory
Ammonium Hydroxide 10% 70° C 158° F Unsatisfactory
Barium Sulfide 100% 24° C 75° F N/A
Benzene 100% 23° C 73° F Unsatisfactory
Bleach 100% 23° C 73° F Unsatisfactory
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F N/A
Carbon Monoxide 100% 50° C 122° F N/A
Carbon Tetrachloride 100% 50° C 122° F Unsatisfactory
Chlorine Water Dilute 23° C 73° F Unsatisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Unsatisfactory
Chlorofluorocarbon 11 100% 24° C 75° F Satisfactory
Chloroform 100% 23° C 73° F Unsatisfactory
Cyclohexanone 100% 24° C 75° F Unsatisfactory
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F Satisfactory
Ethyl Acetate 95% 50° C 122° F Unsatisfactory
Ethylene Glycol 100% 23° C 73° F Satisfactory
Ethylene Oxide 100% 24° C 75° F Satisfactory
Ethylene Oxide 100% 79° C 175° F Satisfactory
Fatty Acids Satisfactory
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F Unsatisfactory
Gasoline 100% 85° C 185° F Unsatisfactory
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F N/A
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Excellent
Isopropanol 70% 23° C 73° F Call
Kerosene 100% 85° C 185° F Satisfactory
Methyl Ethyl Ketone 100% 50° C 122° F Unsatisfactory
Methylene Chloride 100% 23° C 73° F Unsatisfactory
Methanol 100% 23° C 73° F Satisfactory
Nitric Acid 10% 23° C 73° F Unsatisfactory
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F Unsatisfactory
Phenol 90% 23° C 73° F N/A
Phosphoric Acid 5% 98° C 208° F Unsatisfactory
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F N/A
Sodium Chloride 10% 23° C 73° F N/A
Sodium Chloride Sat. sol. 24° C 75° F N/A
Sodium Hydroxide 10% 70° C 158° F N/A
Steam 120° C 248° F Unsatisfactory
Sulfuric Acid 30% 23° C 73° F Excellent
Tetrahydrofuran 100% 23° C 73° F N/A
Toluene 100% 50° C 122° F Unsatisfactory
Trichloroethylene 100% 23° C 73° F Unsatisfactory
Water 100% 79° C 175° F Unsatisfactory

-9002 Polycarbonate (Tinted) — Styron-Calibre Megarad 2081

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 10,000
Elongation at Break, % D638 120
Tensile Yield Strength, psi D638 9,200
Flexural Modulus, kpsi D790 330
Rockwell Hardness D D785 R118
Rockwell Hardness M M75
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 3.9
Deflection Temp °F @264psi D648 266
Deflection Temp °F @66psi D648 273
Water Absorption, %, 24 h D570 0.15
Izod Impact, (Notched) ft-lb/in D256 16.0
Sterilization Stability
Gamma Radiation Excellent up to 10 Mrads with minor loss of physical properties; light violet hue turns clear upon sterilization
Ethylene Oxide (EtO) Highly Compatible
Autoclave Not Recommended
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Satisfactory
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F N/A
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F N/A
Ammonia, Liquid 100% 24° C 75° F Unsatisfactory
Ammonium Hydroxide 10% 23° C 73° F Unsatisfactory
Ammonium Hydroxide 10% 70° C 158° F Unsatisfactory
Barium Sulfide 100% 24° C 75° F N/A
Benzene 100% 23° C 73° F Unsatisfactory
Bleach 100% 23° C 73° F Unsatisfactory
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F N/A
Carbon Monoxide 100% 50° C 122° F N/A
Carbon Tetrachloride 100% 50° C 122° F Unsatisfactory
Chlorine Water Dilute 23° C 73° F Unsatisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Unsatisfactory
Chlorofluorocarbon 11 100% 24° C 75° F Satisfactory
Chloroform 100% 23° C 73° F Unsatisfactory
Cyclohexanone 100% 24° C 75° F Unsatisfactory
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F Satisfactory
Ethyl Acetate 95% 50° C 122° F Unsatisfactory
Ethylene Glycol 100% 23° C 73° F Satisfactory
Ethylene Oxide 100% 24° C 75° F Satisfactory
Ethylene Oxide 100% 79° C 175° F Satisfactory
Fatty Acids Satisfactory
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F Unsatisfactory
Gasoline 100% 85° C 185° F Unsatisfactory
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F N/A
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Excellent
Isopropanol 70% 23° C 73° F Call
Kerosene 100% 85° C 185° F Satisfactory
Methyl Ethyl Ketone 100% 50° C 122° F Unsatisfactory
Methylene Chloride 100% 23° C 73° F Unsatisfactory
Methanol 100% 23° C 73° F Satisfactory
Nitric Acid 10% 23° C 73° F Unsatisfactory
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F Unsatisfactory
Phenol 90% 23° C 73° F N/A
Phosphoric Acid 5% 98° C 208° F Unsatisfactory
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F N/A
Sodium Chloride 10% 23° C 73° F N/A
Sodium Chloride Sat. sol. 24° C 75° F N/A
Sodium Hydroxide 10% 70° C 158° F N/A
Steam 120° C 248° F Unsatisfactory
Sulfuric Acid 30% 23° C 73° F Excellent
Tetrahydrofuran 100% 23° C 73° F N/A
Toluene 100% 50° C 122° F Unsatisfactory
Trichloroethylene 100% 23° C 73° F Unsatisfactory
Water 100% 79° C 175° F Unsatisfactory

-9010 Polycarbonate (Tinted) — Bayer-Makrolon Rx1805

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 10,000
Elongation at Break, % D638 120
Tensile Yield Strength, psi D638 9,200
Flexural Modulus, kpsi D790 330
Rockwell Hardness D D785 R118
Rockwell Hardness M M75
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 3.9
Deflection Temp °F @264psi D648 266
Deflection Temp °F @66psi D648 273
Water Absorption, %, 24 h D570 0.15
Izod Impact, (Notched) ft-lb/in D256 16.0
Sterilization Stability
Gamma Radiation Compatible up to 10 Mrads with minor loss of physical properties; may discolor slightly dependent upon dose/number of cycles
Ethylene Oxide (EtO) Highly Compatible
Autoclave Poor; may craze or stress crack due to molding stresses
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Satisfactory
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F N/A
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F N/A
Ammonia, Liquid 100% 24° C 75° F Unsatisfactory
Ammonium Hydroxide 10% 23° C 73° F Unsatisfactory
Ammonium Hydroxide 10% 70° C 158° F Unsatisfactory
Barium Sulfide 100% 24° C 75° F N/A
Benzene 100% 23° C 73° F Unsatisfactory
Bleach 100% 23° C 73° F Unsatisfactory
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F N/A
Carbon Monoxide 100% 50° C 122° F N/A
Carbon Tetrachloride 100% 50° C 122° F Unsatisfactory
Chlorine Water Dilute 23° C 73° F Unsatisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Unsatisfactory
Chlorofluorocarbon 11 100% 24° C 75° F Satisfactory
Chloroform 100% 23° C 73° F Unsatisfactory
Cyclohexanone 100% 24° C 75° F Unsatisfactory
Dichlorethylene 100% 23° C 73° F N/A
Ethanol 95% 50° C 122° F Satisfactory
Ethyl Acetate 95% 50° C 122° F Unsatisfactory
Ethylene Glycol 100% 23° C 73° F Satisfactory
Ethylene Oxide 100% 24° C 75° F Satisfactory
Ethylene Oxide 100% 79° C 175° F Satisfactory
Fatty Acids Satisfactory
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F Unsatisfactory
Gasoline 100% 85° C 185° F Unsatisfactory
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F N/A
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Excellent
Isopropanol 70% 23° C 73° F Call
Kerosene 100% 85° C 185° F Satisfactory
Methyl Ethyl Ketone 100% 50° C 122° F Unsatisfactory
Methylene Chloride 100% 23° C 73° F Unsatisfactory
Methanol 100% 23° C 73° F Satisfactory
Nitric Acid 10% 23° C 73° F Unsatisfactory
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F Unsatisfactory
Phenol 90% 23° C 73° F N/A
Phosphoric Acid 5% 98° C 208° F Unsatisfactory
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F N/A
Sodium Chloride 10% 23° C 73° F N/A
Sodium Chloride Sat. sol. 24° C 75° F N/A
Sodium Hydroxide 10% 70° C 158° F N/A
Steam 120° C 248° F Unsatisfactory
Sulfuric Acid 30% 23° C 73° F Excellent
Tetrahydrofuran 100% 23° C 73° F N/A
Toluene 100% 50° C 122° F Unsatisfactory
Trichloroethylene 100% 23° C 73° F Unsatisfactory
Water 100% 79° C 175° F Unsatisfactory

-9024 — Sabic-LEXAN HPS1-1H1124 POLYCARBONATE

Documentation    
Regulatory Data Material Data MSDS
 

Polyethylene (-VP1)

-VP1 — Trilliant HC5420-0002 LL Natural Resin

Documentation    
Regulatory Data Material Data MSDS
 

Polypropylene (-6005)

-6005 Polypropylene — Flinthills-P5M6K-080

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 N/A
Elongation at Break, % D638 375
Tensile Yield Strength, psi D638 4,400
Flexural Modulus, kpsi D790 170
Rockwell Hardness D D785 R80-102
Rockwell Hardness M N/A
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 N/A
Deflection Temp °F @264psi D648 N/A
Deflection Temp °F @66psi D648 190
Water Absorption, %, 24 h D570 0
Izod Impact, (Notched) ft-lb/in D256 0.5
Sterilization Stability
Gamma Radiation Very good to commonly used sterilization doses (6 Mrads)
Ethylene Oxide (EtO) Highly Compatible
Autoclave Limited to 121°C for 20 minutes due to low heat deflection temperatures
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Excellent
Acetone 100% 50° C 122° F Excellent
Acetophenone 100% 24° C 75° F Satisfactory
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F N/A
Ammonia, Liquid 100% 24° C 75° F Excellent
Ammonium Hydroxide 10% 23° C 73° F Excellent
Ammonium Hydroxide 10% 70° C 158° F Excellent
Barium Sulfide 100% 24° C 75° F Excellent
Benzene 100% 23° C 73° F Satisfactory
Bleach 100% 23° C 73° F Satisfactory
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F Excellent
Carbon Dioxide 100% 50° C 122° F Excellent
Carbon Monoxide 100% 50° C 122° F Excellent
Carbon Tetrachloride 100% 50° C 122° F Unsatisfactory
Chlorine Water Dilute 23° C 73° F Unsatisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Unsatisfactory
Chlorofluorocarbon 11 100% 24° C 75° F N/A
Chloroform 100% 23° C 73° F Unsatisfactory
Cyclohexanone 100% 24° C 75° F Satisfactory
Dichlorethylene 100% 23° C 73° F Excellent
Ethanol 95% 50° C 122° F Excellent
Ethyl Acetate 95% 50° C 122° F Satisfactory
Ethylene Glycol 100% 23° C 73° F Excellent
Ethylene Oxide 100% 24° C 75° F Satisfactory
Ethylene Oxide 100% 79° C 175° F Unsatisfactory
Fatty Acids Excellent
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F Excellent
Gasoline 100% 85° C 185° F Satisfactory
Glucose Concen. 24° C 75° F Excellent
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F Excellent
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Satisfactory
Isopropanol 70% 23° C 73° F Excellent
Kerosene 100% 85° C 185° F Satisfactory
Methyl Ethyl Ketone 100% 50° C 122° F Satisfactory
Methylene Chloride 100% 23° C 73° F Excellent
Methanol 100% 23° C 73° F Excellent
Nitric Acid 10% 23° C 73° F Excellent
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F N/A
Phenol 90% 23° C 73° F Excellent
Phosphoric Acid 5% 98° C 208° F Excellent
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F Excellent
Sodium Chloride Sat. sol. 24° C 75° F Excellent
Sodium Hydroxide 10% 70° C 158° F Excellent
Steam 120° C 248° F Satisfactory
Sulfuric Acid 30% 23° C 73° F Excellent
Tetrahydrofuran 100% 23° C 73° F Unsatisfactory
Toluene 100% 50° C 122° F Unsatisfactory
Trichloroethylene 100% 23° C 73° F Unsatisfactory
Water 100% 79° C 175° F Excellent

Polysulfone (-40)

-40 Polysulfone — Solvay Udel-P1700

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 N/A
Elongation at Break, % D638 50-100
Tensile Yield Strength, psi D638 10,200
Flexural Modulus, kpsi D790 390
Rockwell Hardness D D785 N/A
Rockwell Hardness M M69
Shore Hardness D D2240 N/A
Coef. of Linear 10-5 in/in/°F D696 3.1
Deflection Temp °F @264psi D648 345
Deflection Temp °F @66psi D648 358
Water Absorption, %, 24 h D570 0.3
Izod Impact, (Notched) ft-lb/in D256 1.3
Sterilization Stability
Gamma Radiation Highly compatible; will discolor to brownish hue
Ethylene Oxide (EtO) Excellent
Autoclave Excellent
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Excellent
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F N/A
Acetylene 100% 24° C 75° F N/A
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F Excellent
Ammonium Hydroxide 10% 23° C 73° F Excellent
Ammonium Hydroxide 10% 70° C 158° F Excellent
Barium Sulfide 100% 24° C 75° F N/A
Benzene 100% 23° C 73° F Unsatisfactory
Bleach 100% 23° C 73° F Excellent
Boric Acid 7% 35° C 95° F N/A
Calcium Carbonate Sat. sol. 24° C 75° F N/A
Carbon Dioxide 100% 50° C 122° F N/A
Carbon Monoxide 100% 50° C 122° F N/A
Carbon Tetrachloride 100% 50° C 122° F Unsatisfactory
Chlorine Water Dilute 23° C 73° F Satisfactory
Chlorine Water Concen. 23° C 73° F Unsatisfactory
Chlorobenzene 100% 23° C 73° F Unsatisfactory
Chlorofluorocarbon 11 100% 24° C 75° F Excellent
Chloroform 100% 23° C 73° F Unsatisfactory
Cyclohexanone 100% 24° C 75° F Unsatisfactory
Dichlorethylene 100% 23° C 73° F Unsatisfactory
Ethanol 95% 50° C 122° F Satisfactory
Ethyl Acetate 95% 50° C 122° F Unsatisfactory
Ethylene Glycol 100% 23° C 73° F Excellent
Ethylene Oxide 100% 24° C 75° F Excellent
Ethylene Oxide 100% 79° C 175° F Excellent
Fatty Acids N/A
Fluorine 100% 23° C 73° F N/A
Formaldehyde 37% 24° C 75° F Unsatisfactory
Gasoline 100% 85° C 185° F Satisfactory
Glucose Concen. 24° C 75° F N/A
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F Excellent
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Excellent
Isopropanol 70% 23° C 73° F Satisfactory
Kerosene 100% 85° C 185° F Satisfactory
Methyl Ethyl Ketone 100% 50° C 122° F Unsatisfactory
Methylene Chloride 100% 23° C 73° F Unsatisfactory
Methanol 100% 23° C 73° F Satisfactory
Nitric Acid 10% 23° C 73° F Satisfactory
Oxygen 100% 24° C 75° F N/A
Ozone 100% 43° C 110° F N/A
Phenol 90% 23° C 73° F N/A
Phosphoric Acid 5% 98° C 208° F Excellent
Propane 100% 23° C 73° F N/A
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F Excellent
Sodium Chloride Sat. sol. 24° C 75° F Excellent
Sodium Hydroxide 10% 70° C 158° F Excellent
Steam 120° C 248° F Excellent
Sulfuric Acid 30% 23° C 73° F Excellent
Tetrahydrofuran 100% 23° C 73° F N/A
Toluene 100% 50° C 122° F Unsatisfactory
Trichloroethylene 100% 23° C 73° F Unsatisfactory
Water 100% 79° C 175° F Excellent

PVDF (-J1A)

-J1A PVDF — Arkema-Kynar 1000

Documentation    
Regulatory Data Material Data MSDS
Typical Resin Properties
Test Method/Material Property ASTM Test Method  
Tensile Strength D638 5,400
Elongation at Break, % D638 100-400
Tensile Yield Strength, psi D638 6,500
Flexural Modulus, kpsi D790 360
Rockwell Hardness D D785 N/A
Rockwell Hardness M N/A
Shore Hardness D D2240 D76-80
Coef. of Linear 10-5 in/in/°F D696 7.6
Deflection Temp °F @264psi D648 244
Deflection Temp °F @66psi D648 N/A
Water Absorption, %, 24 h D570 0.015
Izod Impact, (Notched) ft-lb/in D256 3.1
Sterilization Stability
Gamma Radiation Highly compatible; will discolor to brownish hue
Ethylene Oxide (EtO) Excellent
Autoclave Excellent
Chemical Resistance
Chemical % Temperature° C Temperature° F Recommendation
Acetic Acid 5% 23° C 73° F Excellent
Acetone 100% 50° C 122° F Unsatisfactory
Acetophenone 100% 24° C 75° F Unsatisfactory
Acetylene 100% 24° C 75° F Excellent
Air 100% 82° C 180° F Excellent
Ammonia, Liquid 100% 24° C 75° F Unsatisfactory
Ammonium Hydroxide 10% 23° C 73° F Excellent
Ammonium Hydroxide 10% 70° C 158° F Excellent
Barium Sulfide 100% 24° C 75° F Excellent
Benzene 100% 23° C 73° F Excellent
Bleach 100% 23° C 73° F Excellent
Boric Acid 7% 35° C 95° F Excellent
Calcium Carbonate Sat. sol. 24° C 75° F Exellent
Carbon Dioxide 100% 50° C 122° F Excellent
Carbon Monoxide 100% 50° C 122° F Excellent
Carbon Tetrachloride 100% 50° C 122° F Excellent
Chlorine Water Dilute 23° C 73° F Excellent
Chlorine Water Concen. 23° C 73° F Excellent
Chlorobenzene 100% 23° C 73° F Excellent
Chlorofluorocarbon 11 100% 24° C 75° F Excellent
Chloroform 100% 23° C 73° F Excellent
Cyclohexanone 100% 24° C 75° F Excellent
Dichlorethylene 100% 23° C 73° F Excellent
Ethanol 95% 50° C 122° F Excellent
Ethyl Acetate 95% 50° C 122° F Unsatisfactory
Ethylene Glycol 100% 23° C 73° F Excellent
Ethylene Oxide 100% 24° C 75° F Excellent
Ethylene Oxide 100% 79° C 175° F Excellent
Fatty Acids Excellent
Fluorine 100% 23° C 73° F Excellent
Formaldehyde 37% 24° C 75° F Excellent
Gasoline 100% 85° C 185° F Excellent
Glucose Concen. 24° C 75° F Excellent
Glycerin 100% 24° C 75° F Excellent
Hydrochloric Acid 2% 23° C 73° F Excellent
Hydrochloric Acid 10% 25° C 77° F Excellent
Hydrofluoric Acid 10% 23° C 73° F Excellent
Hydrogen Peroxide 1% 24° C 75° F Excellent
Hydrogen Peroxide 5% 43° C 110° F Excellent
Isopropanol 70% 23° C 73° F Excellent
Kerosene 100% 85° C 185° F Excellent
Methyl Ethyl Ketone 100% 50° C 122° F Unsatisfactory
Methylene Chloride 100% 23° C 73° F Excellent
Methanol 100% 23° C 73° F Excellent
Nitric Acid 10% 23° C 73° F Excellent
Oxygen 100% 24° C 75° F Excellent
Ozone 100% 43° C 110° F Satisfactory
Phenol 90% 23° C 73° F Excellent
Phosphoric Acid 5% 98° C 208° F Excellent
Propane 100% 23° C 73° F Excellent
Sodium Bicarbonate Concen. 24° C 75° F Excellent
Sodium Chloride 10% 23° C 73° F Excellent
Sodium Chloride Sat. sol. 24° C 75° F Excellent
Sodium Hydroxide 10% 70° C 158° F Excellent
Steam 120° C 248° F Excellent
Sulfuric Acid 30% 23° C 73° F Excellent
Tetrahydrofuran 100% 23° C 73° F Unsatisfactory
Toluene 100% 50° C 122° F Excellent
Trichloroethylene 100% 23° C 73° F Excellent
Water 100% 79° C 175° F Excellent

SAN (SAN)

SAN — Luran 388 S 77770

Documentation    
Regulatory Data Material Data MSDS
 

Tubing

AdvantaFlex® Tubing - Clear, Class VI, BioPharmaceutical grade TPE

Documentation    
Regulatory Data Material Data MSDS
 

Platinum Silicone NI201 - Platinum Silicone Rubber Compound

Documentation    
Regulatory Data Material Data MSDS