FibriJet® biomaterial applicators and tips are used to accurately control and dispense biomaterial including tissue sealant, hemostats, and concentrated plasma gel to control bleeding, healing wounds, and other related medical procedures. Single and dual syringe applicators and an extensive line of interchangeable tips meet the particular needs of specific surgical procedures. FibriJet® products dispense a single material or simultaneously dispense two materials to a localized treatment site with simple, one-handed operation.
Each sterile applicator assembly consists of two syringes, one syringe holder, and one plunger link. Applicator tips to deliver the biomaterial to a surgical treatment site are sold separately. All applicator (dual syringe) assemblies are compatible with FibriJet applicator tips unless specifically noted otherwise.
These applicator assemblies allow controlled, simultaneous application of two materials in an 11:1 ratio.
SA-1001
Ratio Applicator Assembly, 11:1 Ratio
10 Per Box
These applicator assemblies allow controlled, simultaneous application of two materials in a 1:1 ratio.
SA-3303
3cc Applicator Assembly, 1:1 Ratio
10 Per Box
SA-3305
5cc Applicator Assembly, 1:1 Ratio
10 Per Box
SA-3310
10cc Applicator Assembly, 1:1 Ratio
10 Per Box
Tips are designed for low viscosity materials that may require extended mixing. Longer length enables access to hard-to-reach treatment sites. The tips can be combined with the SA-3670 blending connector for added versatility.
SA-3646
Single Channel Mixing Tip, Angled 45°, Low Viscosity
15 cm, Stream Output
Compatible with SA-3670 (sold separately)
10 Per Box
Designed to spray biomaterials to open-field, topical, or endoscopic treatment sites. Single spray tips conveniently secure to a standard luer-type syringe. Single cannula extended applicator tips are available in 10 cm, 20 cm, and 30 cm lengths. Includes one single cannula extended applicator tip, tip alignment tool, and two spray tips.
SA-3647
Single Cannula, Extended, 15° Angle Tip
10 cm, Markings to 9 cm, Fine Spray Output
5 Per Box
SA-3648
Single Cannula, Extended
20 cm, Fine Spray Output
5 Per Box
SA-3649
Endoscopic, Single Cannula, Extended
30 cm, Fine Spray Output
5 Per Box
The variety of designs offers surgeons the best instrument choice for the procedure, and the luer lock system prevents accidental dislodging of applicator tips. Dual cannula styles are designed to resist clogging. Tips fit all standard FibriJet Applicator Syringe Assemblies (sold separately) unless specifically noted otherwise. All endoscopic tips are designed for use with 5 mm laparoscopic trocars.
Flexible 360° Gas-Assisted Tip
This unique tip facilitates the application of two liquid biomaterials to laparoscopic and hard-to-reach surgical sites. The tip can spray in any direction and applies a thin layer of combined materials. The sterile set includes an endoscopic applicator tip, tear apart tubing for gas inlet and vent tubing with filters. NOTE: Tip is fixed (not-replaceable) for the SA-3668. A FibriJet vented CO2 gas regulator (i.e., SA-6045) is also required (sold separately).
SA-3668
Endoscopic, 360° Gas Assisted Spray Set
35 cm, Sprays in any direction, Fine Spray Output
5 Per Box
Rigid Dual Cannula Gas-Assisted Tips (1:1 Ratio)
Gas-Assisted Endoscopic tips mix and dispense a thin layer of combined materials to endoscopic treatment sites. Sets include an endoscopic applicator tip, tear-apart gas inlet and vent tubing with filters, tip alignment tool, and two spray tips. A FibriJet vented CO2 gas regulator (i.e., SA-6045) is also required (sold separately). Extra spray tips are also available (sold separately as SA-3659). Sets come in a 1:1 ratio design.
SA-3654
Endoscopic, Gas Assisted Spray Set, 1:1 Ratio
30 cm, Fine Spray Output
Includes tip alignment tool and two spray tips
5 Per Box
SA-3655
Endoscopic, Gas Assisted Spray Set, 1:1 Ratio
40 cm, Fine Spray Output
Includes tip alignment tool and two spray tips
5 Per Box
Rigid Dual Cannula Gas-Assisted Tips (11:1 Ratio)
Gas-Assisted Endoscopic tips mix and dispense a thin layer of combined materials to endoscopic treatment sites. Sets include an endoscopic applicator tip, tear-apart gas inlet and vent tubing with filters, tip alignment tool, and two spray tips. A FibriJet vented CO2 gas regulator (i.e., SA-6045) is also required (sold separately). Extra spray tips are also available (sold separately as SA-3659). Sets come in an 11:1 ratio design.
SA-3657
Endoscopic, Applicator with Mixing Tip, 11:1 Ratio
30 cm, Fine Spray Output
Includes tip alignment tool and two spray tips
5 Per Box
SA-3658
Endoscopic, Applicator with Mixing Tip, 11:1 Ratio
40 cm, Fine Spray Output
Includes tip alignment tool and two spray tips
5 Per Box
Rigid Spray Tips (1:1 Ratio)
Tips mix and dispense a thin layer of combined materials to endoscopic treatment sites. Sets include an endoscopic applicator tip, tip alignment tool, and two spray tips. Extra spray tips are available (sold separately as SA-3659). Sets come in a 1:1 ratio design.
SA-3662
Endoscopic, Applicator with Mixing Tip, 1:1 Ratio
30 cm, Fine Spray Output
Includes tip alignment tool and two spray tips
5 Per Box
Rigid Spray Tips (11:1 Ratio)
Tips mix and dispense a thin layer of combined materials to endoscopic treatment sites. Sets include an endoscopic applicator tip, tip alignment tool, and two spray tips. Extra spray tips are available (sold separately as SA-3659). Sets come in an 11:1 ratio design.
SA-3664
Endoscopic, Applicator with Mixing Tip, 11:1 Ratio
20 cm, Fine Spray Output
Includes tip alignment tool and two spray tips
5 Per Box
SA-3667
Endoscopic, Applicator with Mixing Tip, 11:1 Ratio
40 cm, Fine Spray Output
Includes tip alignment tool and two spray tips
5 Per Box
The variety of designs offers surgeons the best instrument choice for the procedure, and the luer lock system prevents accidental dislodging of applicator tips. Dual cannula styles are designed to resist clogging. Tips fit all standard FibriJet Applicator Syringe Assemblies (sold separately) unless specifically noted otherwise. All endoscopic tips are designed for use with 5 mm laparoscopic trocars.
Malleable Dual Cannula Stream Tips
Tip is designed to facilitate the mixing and application of dual component biomaterials by isolating the components until they passively mix at the treatment site. The malleable metal shaft can be bent or shaped to the surgeon's preference.
SA-3620
Endoscopic, Dual Cannula, Malleable
20 ga x 26 cm (10.25 in), Stream Output
10 Per Box
Semi-Flexible Dual Cannula Stream Tips
Featuring a smooth atraumatic tip and semi-flexible shaft, this tip is for use in endoscopic and tunneling procedures.
SA-3650
Endoscopic, Dual Cannula Semi-Flexible
32 cm, Stream Output
10 Per Box
Offer maximum versatility by providing multiple options for spraying an assortment of materials to topical or open-field procedures. Fit all standard FibriJet applicator assemblies (sold separately) unless specifically noted otherwise. This tip is designed to apply two liquids simultaneously to a treatment site. FibriJet spray tips allow for the controlled, simultaneous application of two biomaterials in 11:1 or 1:1 ratios to a treatment site with simple, one-handed operation.
Gasless Spray Tips
Mix and disperse combined materials in a thin layer to a topical, open-field, or shallow treatment site. The spray output is adjustable from coarse to fine droplet size.
SA-3660
Topical, Dual Spray Tip
Also available with an 11:1 syringe included (SA-1060) or as part of a procedure kit (SA-4460)
10 Per Box
SA-1060
Applicator with Dual Spray Tips, 11:1 Ratio
11:1 dual syringe and topical dual spray tip included
10 Per Box
SA-3674
Blending Connector with Single Spray Tip
Includes two spray tips per device
Additional replacement spray tips also available (SA-3671 and SA-3671-100)
10 Per Box
SA-3675
Topical, Mixing Applicator with Spray Tip
Includes one spray tip, Low Viscosity
3 cm, Conical Spray Output
10 Per Box
Gas-Assisted Spray Tips
Mix and disperse combined materials in a thin layer to a topical, open-field, or shallow treatment site. Intended for use with inert gases only. The spray output is adjustable from coarse to fine droplet size in the gas-assisted spray sets. Sets include a spray tip and gas inlet tubing with a sterile filter. The non-vented/topical gas regulators are required (sold separately).
SA-3651
Topical, Gas Assisted Spray Set, Procedure Kit
Designed to be a clog resistant spray tip. Also available as part of a procedure kit (SA-6111).
5 Per Box
SA-3652
Topical, Gas Assisted Mix and Spray Set
Includes tip alignment tool and two spray tips
5 Per Box
Offer maximum versatility by providing multiple options for spraying an assortment of materials to topical or openfield procedures. Fit all standard FibriJet applicator assemblies (sold separately) unless specifically noted otherwise. A variety of tips designed to facilitate blending or mixing of dual component biomaterials. All tips dispense in a stream.
SA-3670
Blending Connector
Compatible with SA-3646, SA-3671, and SA-3671-100
10 Per Box
SA-3673
Blending Connector with Single Flexible Cannula
18 ga x 5 cm
10 Per Box
SA-3690
Single Cannula, Wire-Reinforced, Malleable
(.125 in) ID x 7.6 cm (3.00 in)
10 Per Box
SA-3677
Mixing Applicator Tip, High Viscosity
3 cm, Stream Output
10 Per Box
SA-3678
Blending Connector with Mixer, Low Viscosity
10 cm
Compatible with SA-3671 and SA-3671-100 (sold separately)
10 Per Box
Designed to facilitate the mixing and application of dual component biomaterials by isolating the components until they passively mix at the treatment site. The malleable metal shaft on these tips can be bent or shaped for better access to the treatment site. The dual channel is designed to resist clogging. Multiple lengths and gauges accommodate a variety of treatment sites. Tips dispense in a stream.
SA-3600
Dual Cannula, Malleable
16 ga x 10 cm (4 in), Stream Output
10 Per Box
SA-3605
Dual Cannula, Malleable
26 ga x 6 cm (2 in), Stream Output
10 Per Box
SA-3610
Dual Cannula, Malleable
26 ga x 8 cm (3 in), Stream Output
10 Per Box
SA-3615
Dual Cannula, Malleable
20 ga x 5 cm (2 in), Stream Output
10 Per Box
SA-3618
Dual Cannula, Malleable
20 ga x 10 cm (4 in), Stream Output
10 Per Box
SA-3619
Dual Cannula, Malleable
20 ga x 18 cm (7 in), Stream Output
10 Per Box
SA-3625
Dual Cannula, Malleable
20 ga x 9.7 cm (3.8 in), Stream Output
Narrower than FibriJet's standard center-to-center dual syringe spacing.
*Not compatible with FibriJet syringe assemblies.
Contact a Nordson MEDICAL Sales Representative for dual syringe compatibility information.
10 Per Box
SA-3626
Dual Cannula, Malleable
20 ga x 17.4 cm (6.8 in), Stream Output
Narrower than FibriJet's standard center-to-center dual syringe spacing.
*Not compatible with FibriJet syringe assemblies.
Contact a Nordson MEDICAL Sales Representative for dual syringe compatibility information.
10 Per Box
Tips easily attach to any luer-style syringe to spray liquid.
SA-3671
Topical, Single Spray Tip
Conical Spray Output
10 Per Box
SA-3671-100
Topical, Single Spray Tip (Box of 100)
Conical Spray Output
100 Per Box
Designed to aid in the insertion of a device into a body cavity. Not intended for introduction into blood vessels.
SA-3445
Endoscopic Catheter Introducer
40 cm
3 Per Box
Additional replacement spray tips that are compatible with many FibriJet products (listed below). Includes a tip alignment tool and two spray tips per pouch.
SA-3659
Tip Alignment Tool with Two Spray Tips
Additional replacement tips for: SA-3647, SA-3648, SA-3649, SA-3662, SA-3664, SA-3667, SA-3654, SA-3655, SA-3657, SA-3658, SA-3652
10 Pouches (20 Spray Tips) Per Box
FibriJet Vented Regulators are designed for use with our endoscopic gas-assist biomaterial applicators. FibriJet Vented Regulators control flow of medical grade CO2 for applying materials in endoscopic surgical procedures. Designed for use with insufflators, the patient vent allows for gas escape at the same rate as gas entry. The instrument panel is easy to read. Quick connect luer fittings ensure correct setup. The foot pedal allows for easy on/off of gas flow during procedures. Device includes an adjustable pole clamp, so the device can be used on multiple surfaces.
SA-6045
FibriJet Vented CO2 Regulator with Vent and Pole Clamp for Laparoscopic Procedures
1 Per Box
Designed for use with our topical/open-field gas-assist biomaterial applicators. FibriJet Regulators control pressure of medical grade inert gases/CO2 for applying materials in topical and open-field surgical procedures. The instrument panel is easy to read. A quick connect luer fitting ensures correct setup. The foot pedal allows for easy on/off of gas flow during procedures. An optional adjustable pole clamp is also available for purchase separately.
SA-6030
FibriJet Topical Regulator, DISS
Medical Air Connection
1 Per Box
SA-6031
FibriJet Topical Regulator, DISS
Carbon Dioxide (CO2) Connection
1 Per Box
SA-6040
FibriJet Regulator Pole Clamp for SA-6030
1 Per Box
Each of our Nordson MEDICAL sterile procedure kits simplify and streamline setup for the application of liquid biomaterials by providing ease-of-use, convenience and efficiency in one package. Each procedure kit includes FibriJet applicator assemblies for controlled application of liquids with a simple one-handed operation, procedure trays for easy storage, and med cups with lids and labels for reliable transfer and handling.
Nordson MEDICAL is your partner when coordinating resources that allow surgery to be performed efficiently, cost-effectively, and with patient safety in mind. Our applicators and tips work with a variety of centrifuge systems and with over 40 applicator tips to choose from, there are a variety of options to fit your surgical preference.
Contact us at 1-800-624-5562 or email us at BMD-sales@nordsonmedical.com to discuss which procedure kits and applicator tips are right for you.
SA-4400
Applicator Procedure Kit, 11:1 Ratio
5 Per Box
Each sterile kit includes:
SA-4460
Our most popular kit!
Dual Spray Applicator Procedure Kit, 11:1 Ratio
5 Per Box
Each sterile kit includes:
SA-6111
Gas-Assisted Procedure Kit, 11:1 Ratio
5 Per Box
Each sterile kit includes:
Rx Only
80011 Rev E 2020-11